Affordable and Efficient Heating from Electric Radiators

There have been significant advancements made in the field of energy-savings in electric heating options. The most innovative of all is the newly-developed infrared heating panel.

Contrary to the claims of some manufacturers, the laws of thermodynamics remain unchanged.  A spokesperson for Electric Heating Expert says “The heating units that apply direct-action are 100% efficient. That includes all heaters in the category of heating panels, radiators and the newly-arrived infrared heaters. One kilowatt or unit of electrical energy will always be converted into a single unit of heat energy.”

Then there are some claims that an infrared heating panel can cost less electric energy than a radiator, there is no physical evidence to support this claim. The fact is any improvement on 100% efficiency would quite literally re-write the laws of physics and usher in a new era of human accomplishment.

Physics Behind the Subject

It is important to consider the physics behind the subject. There are two ways in which heat can be transmitted by an electric heater, these are radiation and convection. Convection works on the fact that heat rises and transfers heat throughout the room. With radiation, the heat is transferred from the heat source itself that can be felt by the people nearby.

Heating panels can only be counted on for radiant heat, but electric radiators are able to harness radiation and convection when heating the room. The kind of heating experience from an electric radiator can be compared to the old wet boiler heating systems.

There have been many recent claims from manufacturers of the infrared heating panels that their products can result in 50% energy reductions in comparisons to another form of heating. The premise is that a 1.0 kW infrared heating panel could heat the same amount as a 2.0 kW electric radiator. While the idea seems to make sense, simple physics dictates that a 2.0 kW electric heater will produce twice the energy of the 1.0 kW infrared heating panel.

Design Flaws

Then there are few other flaws in the design. An infrared heating panel emits only radiant heat. The problem is that this heat is directional. Because the heat waves radiate away from the heat source in a straight line. Because there is no way to benefit from convection that will heat the entire room, people and objects must be directly in front of the heater to feel warm.

In your average home, this will result in various cold spots throughout the home that can only be warmed with the addition of more panels.

Furthermore, convection heat allows the room temperatures and energy consumption to be regulated with a thermostat. The infrared heater must stay on at all times at full capacity to keep a home warm, using 100% capacity at all times. Because the electric radiator can activate and deactivate according to the warmth of the home it will never run at full capacity. In a well-insulated room, it is quite possible that the electric radiator will only use …

Four Strategies for Increasing Home Efficiency

Electric, gas, and water bills are often hefty, leaving home owners struggling to pay bills or increase energy efficiency. Consumers are also becoming increasingly concerned with energy efficiency for reasons outside of slimming bills and saving money. Besides, who wouldn’t opt for a more efficient home, rather than a gas-burning, utility-chomping place of living?

Fortunately, several avenues to reducing energy inefficiency exist. Outlined below are several strategies for increasing your home’s efficiency, all while saving money and helping our green Earth.

Invest in a tankless water heater

Every home needs a water heater. For many years, hefty, sizable water heaters have taken up space in laundry rooms and basements, as well as raise utility bills. Tankless water heaters are relatively new developments, currently becoming more popular in homes around the world. These heaters are installed directly on walls, usually sticking out no more than three inches, if any.

Traditional water heaters must heat and reheat large tank-fulls of water throughout the day, resulting in energy inefficiencies. Tankless renditions of ever-necessary H2O heaters are slightly more expensive than their outdated, tank-holding counterparts, unfortunately. However, tankless heaters are certain to reduce any home’s energy usage as they only heat water as needed.

Trade out inefficient incandescent bulbs for greener options

Outdated, traditionally-used incandescent bulbs generally convert less than five percent of energy used into light, with the 95-percent remainder emitted through heat. Incandescent bulbs are, as described, obviously wastes of money. Also, these bulbs inherently, excessively heat homes as part of their nature. LEDs and CFLs help reduce lighting inefficiencies related to their outdated counterparts.

CFLs are cheaper than LEDs, although energy use between the two are comparable. Compact fluorescent lamps (CFL) generally reduce electricity used by 50- to 75-percent in comparison to incandescent bulbs. Often times, initial investments in CFLs are cheaper than less-efficient options. As if their benefits are not detailed thoroughly enough, CFLs last 10 times longer than their inefficient counterparts.

Crawlspace and attic insulation

Heated and cooled air from homes escape through all cracks and openings, particularly attics and crawlspaces. Spray foam insulation is usually the most popular for plugging gaps in subfloor areas and attics. Unfortunately for home owners, insulating these areas is difficult, time-consuming, and physically exhausting.

Clean Crawls is a trusted provider of attic and crawlspace insulation, cleaning, and restoration. This licensed, bonded, and insured company has more than 20-years’ experience in the Pacific Northwest, where the company still operates out of. Efficiency-minded home owners seeking lower utility bills can visit http://cleancrawls.com/services/ to learn more about their wide palette of energy-saving services.

Insulate windows

Windows often bring unwarranted, outside air into homes without even opening them. Hold a grill or cigarette lighter near cracks in windows to identify possible leaks. Caulk areas where unwanted air seeps inside, simultaneously raising utility bills. Also consider weatherstripping their edges or purchasing new windows to increase efficiency.

Increasing energy efficiency is an elusive concept for home owners, until now. Implement these energy-saving practices into your home and watch utility …

Beautifying an Existing Fence to Enhance Curb Appeal and Optimize Property Value

Restoring, cleaning or enhancing the appearance of existing fence installations can go a long way towards improving a home’s exterior appearance. For homeowners who may be considering listing their residence or selling an investment property, curb appeal is never a consideration that should be taken lightly. Professional fence cleaning and protecting efforts that may restore weather materials to a more attractive state or that can help to minimize the need for future maintenance and upkeep can help to ensure that prospective buyers are more likely to form a positive initial impression when viewing a home.

The Importance of Curb Appeal

Even seemingly minor wear and materials that have just begun to show signs of aging may prove to be a bigger problem than many property owners might realize. Lack of curb appeal can find many prospective buyers electing to pass up on a home and those that do show interest are far more likely to tour a property with a critical eye towards potential issues and prospective problems in the event that exterior maintenance has been neglected. Fence cleaning and restoration efforts can often produce a considerable return of investment, especially in circumstances where existing installations may have become an eyesore or when long-term upkeep efforts were insufficient.

Restoration Efforts Are Far More Cost-effective Than New Installations

Preparing a home for sale is often an expensive undertaking, especially for property owners who fail to keep an eye on their bottom line. Choosing to clean and restore an existing fence may often be done for a fraction of the cost that would be required in order to replace an existing installation. Even for larger properties that may feature extensive fencing installations and situations where renovation and upgrade efforts may require replacing damaged materials, extensive sanding and priming or the purchase of stains, sealants and other products, choosing to clean and renovate an older fence is often the most affordable solution.

Reducing the Need for Future Maintenance

Applying a sealant or other protective agent to fencing materials can drastically reduce the need for future upkeep. Products that can provide protection from moisture, exposure to sunlight and even seasonal temperature variations may greatly extend the overall lifespan of a fence. Addressing not just current maintenance issues but those that might crop up in the days ahead can make a real difference when the time comes to close the deal on a residential property. Ensuring that exterior fences and outdoor installations are able to last as long as possible can go a long way towards improving the exterior appearance, curb appeal and market value of a home.…

3 Questions to Ask Bespoke Glazing Solution Specialists

When it comes to dealing with a project that requires or requests the use of glass as the main structural component of a building, bespoke glazing methods are often used. “Bespoke” is another word for custom built or uniquely made, while “glazing” refers to the process of toughening, laminating, and or coating glass for insulated, acoustic or structural integrity purposes. You’ve seen it in modern homes, skyscrapers, shopping centres etc. Bespoke glazed glass is especially popular these days as it is a much cheaper, safer, and sturdier solution than wood, concrete, or otherwise. It’s even popular to use at home as well, as many bespoke glazing London specialists offer door, skylight, window, and sunroom solutions.

So, why do architects need to use bespoke glazing solutions? Whether an architect or contractor is using float glass, tempered glass, laminated glass or otherwise, bespoke glazed glass might be a requirement for safety reasons. In fact, many people call bespoke glazed glass “safety glass” because it is less likely to break or pose a threat when broken than other methods of treating glass. However, the project in question might want to feature bespoke glass for aesthetic purposes. It is possible to include artwork and designs between the sheets of glass before they are heated and bonded in a kiln, creating an exquisitely unique piece of artwork when finished.

If you are thinking of doing a commercial or a residential project that is better suited for a bespoke glazing solution, then you might want to consider asking a specialist these three crucial questions below, here’s why:

Can We See Some Of Your Past Projects?

This question is a must. When you are dealing with projects of this magnitude, you have a lot on the line. People could get hurt from the result of faulty manufacturing or installation – nobody needs this. This question is practically common sense as well. It’s standard practice to ask for a portfolio, reference, resume, contacts, etc. for any prospective business or work-related transaction or interaction. Having a look at past projects will bring to light and actualize the specialist’s skill-set and style. You will be able to see just what they have done, and who they have worked for, so asking to look at some of their previous works will give you a few contacts who might be able to vouch for their work. Moreover, it will also give you insight into the client’s style and approach to custom glazing. To avoid confusion and order a product, you didn’t end up wanting or needing, always demand to look at a specialist’s portfolio.

Do You Manufacture Your Products In-House?

This is another brilliant question to ask any specialist because after all, one’s bespoke glazing solutions wouldn’t be “bespoke” if they were not manufactured in-house! If any bespoke glazing specialist says that they outsource their manufacturing, then this is not the type of specialist you want. When you want something made for aesthetic and needs to adhere to a set amount of …

Home Improvement Ideas and Tips

My wife and I want to fix up our house, but we are in a bit lost on where to get started in the first place. We bought this house a few years ago with the intention of fixing it up, but we have not had the time or the money to do so yet, and so at the present moment, it does look even worse than it did when we bought it. That’s kind of sad to admit, but it is the truth. We have some ideas, like we would like to get some orange county shutters put on the windows of the house, and there are a few other things.…